Specifications

page 7
a. Time Delay Duration
If the time delay parameter has been set and you want to change it, enter a user code to start the time
delay. When Time Delay expires (the lock emits 10 rapid beeps) and the opening window period has
begun, set your Time Delay minutes. Enter:
7 4 * Master Code #

0 0 #

Time Delay minutes #

Time Delay minutes #

For example, to set the Time Delay to 15 minutes, enter:
7 4 * Master Code #

0 0 #

1 5 #

1 5 #

To eliminate the Time Delay period, simply enter zero (0) for the Time Delay minutes.
b. Opening Window Duration
The opening window (OW) is the period of time during which you can open the lock, immediately following
the end of the time delay period. The OW can be set for 1 to 10 minutes; the factory default is 2 minutes.
Security Note: Changes to the opening window duration can only be made during the opening window.
To set the minutes for the Opening Window, enter:
7 4 * Master Code #

0 1 #

Opening Window minutes #

Opening Window minutes #

For example, to set the Opening Window to 5 minutes, enter:
7 4 * Master Code #

0 1 #

5 #

5 #
