User guide
Frame
Unreinforced
door
Door stop
Mortise nut
Drill 3/8" Dia.
hole for mortise
nut body
Dia. hole
f
1
SARGENT
®
1331 DOOR CLOSER INSTALLATION
INSTRUCTIONS WITH JUO (JO & JP9) ARMS
Strength Adjustable From Size 1 Thru 6
CAUTION: FAILURE TO INSTALL OR ADJUST PROPERLY MAY RESULT IN INJURY OR DAMAGE
Auxiliary door stop required
F
OR ASSISTANCE, CALL SARGENT AT 1-800-727-5477 or www.Sargentlock.com
Choose From 1 of the 3 Applications
OR
Pre-drill - 3/32” holes
for self tapping screws or #16 drill for
#12-24 tap for machine screws
Use Standard & Parallel Full Size Templates Provided
JO Standard Arm JP9 Parallel Arm JO Top Jamb Arm
*1/4" Variance allowed for retrofit of existing closers
NOTE: With swing clear hinges, use data sheets provided.
Frame
Door stop
Unreinforced door
Mortise nut
Drill 3/8" dia.
hole for mortise
nut body
Drill 1/4" dia.
hole for screws
8
With fasteners provided, secure closer body to door with power adjust-
ment away from hinge.
Power Adjustment
Using optional mortise nuts when through-bolting
A7741A
Copyright
©
2008, Sargent Manufacturing Company, an ASSA ABLOY Group company. All
rights reserved. Reproduction in whole or in part without the express written permission of
Sargent Manufacturing Company is prohibited.
A7741A
Copyright
©
2008, Sargent Manufacturing Company, an ASSA ABLOY Group company. All
rights reserved. Reproduction in whole or in part without the express written permission of
Sargent Manufacturing Company is prohibited.