Owner manual

1546, 1547, 1548, 1549 SERIES

SURFACE OVERHEAD HOLDERS & STOPS

INSTALLATION INSTRUCTIONS

• Use the attached template that corresponds with the type of hinge being used

• Drill door for channel and drill and tap metal frame for #12-24

machine screws to attach jamb bracket

Friction adjustment on models

1546F, 1547F, 1548F and 1549F only

• To increase friction, insert flat bladed screw driver as shown

and turn clockwise for desired friction

LEFT HAND SHOWN

• Secure channel to door (spring end towards hinge) with machine screws and

mortise nuts provided

• For models 1547, 1548 and 1549 only, install bracket on channel as shown

• Secure jamb bracket to frame with fasteners provided

Holding tension adjustment on hold open models only

(1546H, 1547H, 1548H and 1549H)

• To increase tension insert a 9/32"

allen wrench and turn clockwise as required

JAMB BRACKET

BRACKET

SPRING

END

A7501B TEMPLATE 7488D

NON-HANDED. LEFT HAND SHOWN, RIGHT HAND OPPOSITE.

FOR INSTALLATION ASSISTANCE, CONTACT SARGENT AT 800-727-5477 or www.sargentlock.com

A7501B

Reproduction in whole or in part without the express written

permission of SARGENT Manufacturing is prohibited.

PAGE 1
546, 1547, 1548, 1549 SERIES SURFACE OVERHEAD HOLDERS & STOPS INSTALLATION INSTRUCTIONS NON-HANDED. LEFT HAND SHOWN, RIGHT HAND OPPOSITE. FOR INSTALLATION ASSISTANCE, CONTACT SARGENT AT 800-727-5477 or www.sargentlock.
PAGE 2
A7501B TEMPLATE 7489D TEMPLATE 7490C A7501B 3
PAGE 3
2 A7501B TEMPLATE 7489D TEMPLATE 7490C A7501B 3
PAGE 4
1546, 1547, 1548, 1549 SERIES SURFACE OVERHEAD HOLDERS & STOPS INSTALLATION INSTRUCTIONS NON-HANDED. LEFT HAND SHOWN, RIGHT HAND OPPOSITE. FOR INSTALLATION ASSISTANCE, CONTACT SARGENT AT 800-727-5477 or www.sargentlock.