Manual

ManualsBrandsSARGENT ManualsSafety7000 Series Vertical Rod Lock

Instructions for Installing 7000 & 12-7000 Series

Concealed Vertical Rod Latch Device

Note 1) Measure gap between top of door/ frame and bottom of door

and floor before removing door from hinges (Ref. Steps 6 & 7).

Note 2) For 100 Series Auxiliary Controls:

Prep door BEFORE installing latching device. Install Aux Control AFTER installing latching device.

For 106 or 113 Aux Controls: Template: 4212 Installation instructions: A5985

1) Drill and countersink door per templates to right and below.

Handing

Right Hand DoorLeft Hand Door

Left Hand Reverse Bevel

Right Hand Reverse Bevel

RHRB

LHRB

PAGE 1

7860D

4/13

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

To view helpful video installation tips,

scan the Microsoft

Tags with

your mobile phone. Download the free

mobile app at http://gettag.mobi.

Scan to see a

video of this

installation step.

Summary of content (8 pages)

PAGE 1
Instructions for Installing 7000 & 12-7000 Series Concealed Vertical Rod Latch Device Note 1) Measure gap between top of door/ frame and bottom of door and floor before removing door from hinges (Ref. Steps 6 & 7). Note 2) For 100 Series Auxiliary Controls: Prep door BEFORE installing latching device. Install Aux Control AFTER installing latching device. For 106 or 113 Aux Controls: Template: 4212 Installation instructions: A5985 1) Drill and countersink door per templates to right and below.
PAGE 2
) Screw top bolt & rod assembly (A) and bottom bolt & rod assembly (D) into inner chassis (B). 3) Slide complete assembly into top of door. 4) Attach inner chassis (B) to door with (2) screws (GG). 5) Attach inside and outside ET Lever trims using ET mounting screws. Insert spindle thru 1-1/4" thru hole. Spindle cams must be UNDER inner chassis platform (C). Scan to see a video of this installation step. 6) Adjust TOP BOLT AND ROD assembly (A) with the inside lever rotated in a down position.
PAGE 3
8) Slide rod silencer (G) over top bolt (F) onto rod. NOTE: The teeth on the rod should face the teeth on the top case. 9) SLIDE TOP case (E) over top bolt (F). Secure with (2) screws (HH). 10A) For AD-7000 bottom bolt: Install bottom plate (M) over bottom bolt (L) and secure with (2) screws (HH) using holes (6A).
PAGE 4
Instructions for Installing NB-7000 & 12-NB-7000 Series Concealed Vertical Rod Latch Device Note 1) Measure gap between top of door and frame, and bottom of door and floor before removing door from hinges. (Ref. Step 6 & 7). Note 2) For 100 Series Auxiliary Controls: Prep door BEFORE installing latching device. Install Aux Control AFTER installing latching device. Note 3) For 100 Series Auxiliary Controls: Prep doors BEFORE installing latching device. Install Aux Control AFTER installing latching device.
PAGE 5
2) Screw top bolt & rod assembly (A) into inner chassis (B). 3) Slide complete assembly into top of door. 4) Attach inner chassis (B) to door with (2) screws (GG). 5) Through bolt inside and outside ET Lever trims using ET mounting screws. Spindle cams must be UNDER inner chassis platform (C). A 6) USE INSIDE TRIM to adjust TOP BOLT AND ROD assembly (A). Top bolt & rod assembly For 1/8" GAP OR LESS between top of door and door frame, rotate bolt even with top of door.
PAGE 6
7) Slide rod silencer (G) over top bolt (F) onto rod. Position top case (E) over top bolt (F). Secure top case (E) to door with (2) screws (HH). HH Screws (2) 8) Install door in frame using hinges. E Top case 650 Top Strike G 8) 650 Top Strike ATTACH 650 Top Strike to door frame, (2) #10-24 x 1/2" flat head screws (Reference template 4449). 9) BEFORE CLOSING DOOR Adjust bolts per steps 6 as needed: a) Either lever retracts bolt. b) Bolt stays retracted (hold back).
PAGE 7
Instructions for Installing Classroom Function on 7000,12-7000, NB-7000 and 12-NB-7000 Series Concealed Vertical Rod Latch Device 1. T hrough bolt the trim as described in Step 5 on pages 1 & 2. Ensure that the inside cylinder tailpiece engages the auxiliary cam on the outside trim. 2. Check for smooth locking and unlocking via cylinder on both sides of the door. Auxiliary Cam Inside Cylinder Tailpiece Remove components shown below in order to replace outside cylinder.
PAGE 8
SARGENT Manufacturing Company 100 Sargent Drive New Haven, CT 06511 USA 800-727-5477 • www.sargentlock.com Founded in the early 1800s, SARGENT® is a market leader in locksets, cylinders, door closers, exit devices, electro-mechanical products and access control systems for new construction, renovation, and replacement applications. The company’s customer base includes commercial construction, institutional, and industrial markets.