User's Manual

INTERVAL MEMORY MODE
To access stored interval data for the
previous 9 intervals only
:
1) Enter the interval mode hold [MODE] until “INT”appears on the left hand side of the display.
2) Press [MODE] to scroll until the “INT”flashes. NOTE:INT now constitutes a fourth level of dis-
play.
3) Hold [SELECT] and the memory icon (”M”) appears next to the interval number (FIGURE 25).
4) With “INT”flashing,press [SELECT] to advance to the interval you wish to view.
5) Press [MODE] scroll the cursor to the line of information you wish to view. NOTE:Recovery
periods as well as work periods are displayed in memory mode.
To exit back out of the interval memory mode hold [SELECT] until the memory icon disappears.
The computer is now displayed in the interval mode. To exit from the interval mode from any
location on the display hold [MODE] until “INT”disappears.
21
watts
speed
int m
multi
FIGURE 25