User's Manual

9. Connection to PC

This is to use AivX as a portable Hard Disk Drive.

You should disconnect the USB cable from AivX when you use AivX on your TV.

Otherwise, it will not show the main menu on TV.

9.1 Windows ME/2000/XP

AivX doesn’t need to setup drive to install on WinME/2000/XP OS.

⊙ Connection

1. Connect AC power cable.

2. Push “power ON/OFF” on the back side of AivX.

3. If you connect AivX to your PC using USB cable, new local drive will be created in “My Computer”. Now

you may use the drive.

★Caution:

1. If you use a new HDD to AivX, you should FDISK and FORMAT.

Please refer to the Installation CD at “/MANUAL/FDISK&FORMAT/format(English).pdf”

2. When you make a partition, please make sure that the integrated HDD is partitioned to “primary

partition (P)”. If AivX is partitioned to “logical drive or extended partition”, you will get a message saying

“HDD mount fail” on TV.

3. If you make more than two partitions, it will be shown as “/hd1/, /hd2/…”.

When you make one partition into AivX, the “hd1” will be the highest level folder.

⊙ Disconnection

1. If you want to physically disconnect AivX from PC after using, point your mouse cursor to the USB device