User's Manual

6-1 Installation of IEEE 1394

 Caution

1. Turn on the power to satisfy the plug &play function of window

and then connect to the IEEE1394 in computer

2. If the IEEE 1394 port has 4 pins or using Card Bus way of notebook

computer, the power can not be supplied.

Please connect the power adapter or USB power cable.

1. Windows 98 SE

 Caution: Be sure to ready "Window 98 SE CD-ROM" before you

install FHD-181

(FHD-181F can be installed only Windows 98 SE or later version)

1) Booting Windows 98 SE

2) Connect the IEEE 1394 cable to the FHD- 181 of IEEE 1394 port in computer

3) Finding the message " insert the disk" --> insert the "Windows 98 SE CD-ROM"

in CD-ROM drive --> click "confirmation" .

Then the driver will be installed automatically

4) Make sure if the hard disk icon is appearing in "My computer"

 Checking the installation : After finishing the installation Control panel