User's Manual

20
5) Choose the "No.5 change the present hard disk" among the fdisk options.
6) Choose the last number in change the " hard disk drive" -> type the hard
disk number of fdisk in " type the hard disk number" -> press "Enter"
※ Caution : If you connect several hard disk, you could have wrong number.
Please choose the 0% number as the picture.
7) Press "Esc" -> choose the "No. 1 select the logic dos drive or partition"
among the fdisk option items -> type "No.1" -> press "Enter"
8) Choose "No.1 basic DOS partition" among select the logic dos drive
or partition --> type "No.1" --> press "Enter"
9) Just wait for the "no formation test"
10) After finishing the "no formation test" you can find the message " Will you
use the whole capacity for basis DOS partition?" -> type "Y" -> "Enter"
11) Type the "needed capacity or 0%" directly and press " Enter"
12) After finishing the "no formation test" again, you can find the message
"select basis Dos partition, the drive word is changed or added" then press
"Esc" to return to Fdisk option.
13) Press "Esc" -> find the message " re-start the computer" -> press "Esc"
Again
14) If you find C:￦Windows> press " Exit" to return to Windows.
15) Separate the FHD-354 from the computer Connect the FHD-354 to USB port or
IEEE 1394 port in computer again
16) The "drive word" will be created in " my computer"
17) Choose the drive -> press the right side of Mouse and do the format (M)
2. Windows 2000
■ The way to Fdisk and Format with new hard disk (with one drive)
1) Install the driver before connecting the product to computer. (for USB way)
2) Install the driver and then connect the product to the USB port
or IEEE 1394 port in computer.
3) Click "my computer" in the screen with the right side of Mouse -> choose
management.
4) Click "not allotted (ex. disk 1)" in disk management with the right
side of Mouse and make.
5) Coming out the disk you have to check and click "Next"
6) Coming out the disk signature and finishing upgrade magician, click "Finish"