Operating instructions

58
Example: Checkweigh a sample with an unknown weight in the tolerance limit display mode.
If desired,
w if the weight display mode is activated, toggle to the tolerance limit display mode
The weighing platform is unloaded and LL (weight too light) appears on the main display
(in the tolerance limit display mode only)
Place a sample of unknown weight on the weighing platform
If the weight is greater than the maximum, HH (weight too heavy) is indicated
(in the tolerance limit display mode only).
If the weight is within the tolerance range (here: 103.2 g), the weighed value is indicated
(in the tolerance limit display mode only)
p Print a data record
EISENVATER Data record
GOETTINGEN
19.03.2002 15:43
--------------------
Setp + 100.0 g Target value
Min + 95.0 g Minimum
Max + 105.0 g Maximum
G# + 103.2 g Gross weight
T + 0.0 g Tare weight
N + 103.2 g Net weight
Lim + 3.20 % Deviation from target value* in percent
Diff.W+ 3.2 g Absolute deviation from target value
--------------------
* If the weight is less than the minimum Stat LL appears here
If the weight is greater than the maximum Stat HH appears here
LLx
Combics 2
hhx
1032