Operating instructions

Totalizing Σ
With the Totalizing application, you
can add weight values to the totalizing
memory. The number of values added
to the memory is also stored (“transac-
tion counter").
Features:
– Weigh in up to 199 items
– Current transaction number displayed
in the text line (indicating the items
already added)
– Save weight values manually or
automatically
– Accurate calculation of total of weight
values from two weighing instruments
– Unfinished totalization stored in
battery-backed memory
– Toggle the display between current
weight and total value by pressing w:
– Totalizing mode: shows the value in
totalizing memory plus the current
weight; for filling to a defined total
– Automatic printout of component or
total weight when weight is saved
– Automatic taring of container weight
– Minimum load for automatic tare
– Minimum load for storing values
– Press and hold w to display the value
in totalizing memory (net, gross) in
the Info mode, accurately calculated in
the active weight unit.
53
Operating the Combics 2
The Combics has a totalizing memory
for adding individual net and gross
values. There are two ways to store
weight values in the totalizing memory:
- Manually, by pressing the O key.
The value is added to the value already
stored, and the transaction counter
value increases by one.
When a value is added manually,
the program does not check whether
the weighing instrument has been
unloaded since the last time the O
key was pressed.
– Automatically, when the weighing
instrument has stabilized and the
minimum load is exceeded (menu item
3.16.2).
The weighing instrument is considered
to be unloaded when the load is
less than 50% of the minimum load
(menu item 3.6.
The numeric display shows the
transaction counter.
Press the c key to clear the totalizing
memory. A printout is generated
automatically.
With the weighing instruments con-
nected, you can add values from both
instruments to the totalizing memory.
The displayed result is accurately calcu-
lated in the active weight unit.
Example: 1.243 kg (measured on a
weighing instrument using 1 scale
interval) added to 1.40 kg (measured on
a weighing instrument using 5 scale
intervals) is displayed as 2.643 kg.
Application Parameters: Totalizing
3. 5. Minimum Load for Automatic Taring
and Automatic Printing
3. 5. 1 * 1 digit
3. 5. 2 2 digits
3. 5. 3 5 digits
3. 5. 4 10 digits
3. 5. 5 20 digits
3. 5. 6 50 digits
3. 5. 7 100 digits
3. 5. 8 200 digits
3. 5. 9 500 digits
3. 5.10 1000 digits
3. 6. Minimum Load for Automatic Storage/
Transfer of Values
3. 6. 1 * 1 digit
3. 6. 2 2 digits
3. 6. 3 5 digits
3. 6. 4 10 digits
3. 6. 5 20 digits
3. 6. 6 50 digits
3. 6. 7 100 digits
3. 6. 8 200 digits
3. 6. 9 500 digits
3. 6.10 1000 digits
3. 7. Automatic Taring: 1st Weight Tared
3. 7. 1 * Off
3. 7. 2 On
3. 8. Start Application with Most Recent
Application Data when Combics
is Switched On
3. 8. 1 Automatic (on)
3. 8. 2 * Manual (off)
3.16. Automatic Storage/Transfer of Value
3.16. 1* Off
3.16. 2 On
3.17. Automatic Individual or Component
Printout when Value Stored
3.17. 1 Off
3.17. 2* Generate printout with complete
standard configuration each time
O is pressed
3.17. 3 Generate printout with complete
standard configuration only once
when O is pressed