Operating instructions

23
Weight Units
You can select any of the following weight units:
Symbol Code Changes
Grams g 1 7 2 *
Kilograms kg 1 7 3
Carats ct 1 7 4
Pounds lb 1 7 5
Ounces oz 1 7 6
Troy ounces ozt 1 7 7
Hong Kong taels tl 1 7 8
Singapore taels tl 1 7 9
Taiwanese taels tl 1 7 10
Grains GN 1 7 11
Pennyweights dwt 1 7 12
Milligrams mg 1 7 13
Parts per pound o 1 7 14
Chinese taels tl 1 7 15
Mommes m 1 7 16
Austrian carats k 1 7 17
Tola t 1 7 18
Baht b 1 7 19
Mesghal m 1 7 20
Some unit symbols printed on hard copy or output on a computer screen will differ from the way they are
shown on the balance display:
this applies to code numbers ending with 8= tlh
9= tls
10= tlt
14= /lb
15= tlc
16= mom
17= K
18= tol
19= bat
20= MS
Calibration Function
Code Changes
Calibration with standard calibration weight only 1 9 1
Calibration with standard or other
calibration weights approved for use 1 9 2 *
Calibration function – access denied 1 9 5
Final Readout Mode »--«
If you are only interested in the final readout, you can select this mode with code 2 5 1. A special symbol
“ - -“ is displayed until the final stable readout appears in digits. For the standard readout mode, set code
2 5 2 (all readouts in digits).
Read out »--« Code Changes
Special symbol»--« for unstable readouts when load
changes
2 5 1
Standard digital readout mode 2 5 2 *
* = factory setting, depends on balance model in some cases