Operating instructions

27
- press the
CAL
key until
"8"
appears
- press the
key until the third digit of the code appears (here,
the current code setting always appears)
- use the
CAL
key to change the right-hand number to
"2"
- confirm the code setting You must press the tare control
(15)
to
confirm the code you have just set (this is indicated by
"o"
after
the code).
- use the
key to move to the left digit
- press the tare control (15) to store the menu code setting
Important Note
The changed code will not be stored if you turn off the balance with
the ON/OFF key during the setting procedure, or before storing the
menu code.