Operating instructions

Care and Maintenance

Cleaning

Before cleaning the balance, unplug the AC adapter from the wall out-

let.

Please do no use any aggressive cleaning agents (solvents or similar

agents). Instead, use a piece of cloth wet with a mild detergent.

Make sure that no liquid enters the balance housing.

After cleaning, wipe down the balance with a soft, dry piece of cloth.

Safety Inspection

lf there is any indication that safe Operation of the balance with the

AC adapter is no longer warranted, turn off the power and unplug the

balance from AC power. Lock the balance and AC adapter in a secure

place to ensure that they cannot be used for the time being.

Safe Operation of the balance with the AC adapter is no longer en-

sured when

- there is visible damage to the AC adapter

- the AC adapter no longer functions properly

- the AC adapter has been stored for relatively long periods un-

der unfavorable conditions

In this case, notify your nearest Sartorius Service Center or the Inter-

national Service Support Department in Goettingen, Germany. Only

service technicians who have access to the required maintenance

manuals are allowed to perform maintenance and repair work on the

equipment.

We recommend the balance along with the AC adapter be inspected

according to the following checklist by a qualified Sartorius service

technician:

- Leakage current < 0.05 mA measured by a properly calibrated

multimeter

- Insulation resistance > 7 megohms measured with a constant

voltage of at least 500V at a 500 kohm load