Sartorius Basic Series Electronic Analytical and Precision Balances Installation and Operating Instructions
B 120S 2
B 310P, B 310S 3
B 410, B 610, B 3100P, B 3100S, B 4100, B 6100 4
1 Weighing pan 2 Protective ring (only for B 120S) 3 Shield plate (only for B 120S) 4 Round draft shield lid (only B 310P and B 310S) 5 Glass draft shield cylinder (only B 310P and B 310S) 6 Base plate shield cylinder (only B 310P and B 310S) 7 Pan adapter (only B 310P and B 310S) 8 Power receptacle 9 Level indicator (only B 120S, B 310P, B 310S, B 3100P and B 3100S) 10 Leveling foot (only B 120S, B 310P, B 310S, B 3100P and B 3100S) 11 PRINT key (functions only if the balance has a bui
Sartorius Basic Series With this Sartorius Balance, you have acquired a high-quality electronic precision weighing instrument that will help ease your daily workload. Please read these installation and operating instructions carefully before operating your new balance.
Contents Page Equipment Supplied 8 Installation Instructions 9 How to Start Up the B 120 S 10 How to Start Up the B 310P and B 310S 11 How to Start Up the B 410, B 610, B 3100P, B 3100S, B 4100, and B 6100 12 Operation 13 Calibration 15 Balance Operating Program 16 Troubleshooting Guide 19 Accessories 20 Specifications 22 7
Equipment Supplied B 120S - Balance AC adapter Dust cover Weighing pan Protective ring Shield plate B 310P, B 310S - Balance AC adapter Dust cover Pan adapter Base plate of the round draft shield Weighing pan Glass draft shield cylinder Round draft shield lid B 410, B 610, B 3100P, B 3100S, B 4100, B 6100 - Balance AC adapter Dust cover Weighing pan Do not miss out on the benefits of our warranty.
Installation Instructions Please choose a suitable place to set up your balance. lt should not be exposed to the following: — — — — heat radiation aggressive/corrosive environments vibrations drafts. Despite unfavorable operating conditions, your Sartorius Balance will deliver accurate results because you can adapt it to your particular requirements and to the specific ambient conditions simply by changing the menu code settings in the balance operating program.
How to Start up the B 120S Install the components (3-1) in the weighing chamber one at a time in the order indicated. Your balance is powered by an AC adapter. Make sure that the voltage rating printed on this unit is identical to your local line voltage rating. Plug the cord of the AC adapter into the power receptacle. Secure the connection by tightening the knurled collar. Now plug the AC adapter into an electrical or wall outlet.
How to Start up the B 310P and B 310S Attach the dust cover by pressing down on the adhesive disks, and install the components (7, 6, 1, 5 and 4) one at a time on the balance in the order given. Your balance is powered by an AC adapter. Make sure that the voltage rating printed on this unit is identical to your local line voltage rating. Plug the cord of the AG adapter into the power receptacle of the balance. Now plug the AC adapter into an electrical or wall outlet.
How to Start up the B 410, B 610, B 3100P/S, B 4100 and B 6100 Attach the dust cover by pressing down on the adhesive disks, and place the weighing pan (1) on the balance. Your balance is powered by an AG adapter. Make sure that the voltage rating printed on this unit is identical to your local line voltage rating. Plug the cord of the AC adapter into the power receptacle of the balance. For models B 410 and B 610, secure the connection by tightening the knurled collar.
Operation The weight display shows the following special messages for your information: BUSY The balance processor is still busy processing a function and will not accept any other commands to perform functions at this time. STANDBY The balance has been turned off with the ON/OFF key (15) and is now in the STANDBY mode and ready to operate without warmup. POWER OFF The balance was disconnected from line power (reconnection to line power after the balance was unplugged, power failure or outage).
Press the ON/OFF key (15) to turn the balance on or off. You can also turn it on by pressing the tare control (13). After the balance has been plugged into a wall outlet using the adapter, the weight display will go out whenever you turn off the power. All other electronic circuits will remain energized (indicated by STANDBY). This means the balance is immediately ready to operate without requiring warmup the next time you turn it on.
Calibration - Only possible with an accurate calibration weight (B 120S — 100 g; B 310P — 200 g; B 310S, B 410 — 300 g; B 610 — 500 g; B 3100P/S, B 4100 — 2,000 g; B 6100 — 5,000 g) – see "Accessories" – Unload the balance and press the CAL key (14) for at least 3 seconds until the calibration weight readout appears in the display. Center the calibration weight on the weighing pan. Now the weight unit symbol is displayed. An acoustic Signal indicates the end of the calibration procedure.
Balance Operating Program The balance operating program lets you adapt your balance to various ambient conditions and requirements and select weight units commonly used in your country. At the factory, we have set the codes for a Standard program, which is protected by a program lock to prevent accidental changes. The "code" contains the information of the operating program, lt consists of three digits known in "computerese" as the "page" st nd rd (1 digit),the "line" (2 digit) and the "word" (3 digit).
After you have accessed the menu of the balance operating program, the display will show a continuous sequence of numbers from 0-5 for the "page" or first digit of the code, in addition to the Status code letter "L" or "C." When the first digit of the code you wish to check or change appears, press the tare control (13). st The "page" code number (1 digit) now stops in the display, and nd a series of numbers for the 2 digit or "line" will begin to cycle.
C 1 3 1 Page Line Word Menu of the Balance Operating Program (Active Parameters) Code C C C C 1 1 1 1 1 1 1 1 1 2 3 4 Code C C C C C C C C C 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 1 1 1 1 3 3 3 3 Stable Unstable Very unstable 1 2 3 4 5 6 7 8 9 Stability Range 0,25 digit 0,5 digit 1 digit 2 digits(B 120S) 4 digits 8 digits 16 digits 32 digits 64 digits 1 2 3 4 Display Format Last decimal ON Last decimal OFF Last decimal at stability All decimals at stability Code C C C C Ambient Conditions
Troubleshooting Guide Problem ... Causes ...
Accessories (Options) Interface — for B 120S — for B 310P/S, B 410, B 610 — for B 3100P/S, B 4100, B 6100 Data printer with date/time and statistics functions YDO 01A YDO 01L YDO 01U YDP 02-0D Print speed approx.lines/sec.1.5 Printer housing (W x D x H) in mm 150 x 138 x 43 in inches5.9 x 5.4 x 1.
Special draft shield chamber (only for B 31OP/S) Calibration weights for: B 120S (1 x 100 g) B 310P (1 x 200 g) B 310S, B 410 (4 x 100 g) B 610 (1 x 500 g) B 3100 P, B 3100 S, B 4100 (2 x 1,000 g) B 6100(1 x 5,000 g) External rechargeable battery pack; approx.
Specifications Model Capacity/weighing range Readability Tare range (by subtraction) Standard deviation Max.
Specifications Model Capacity/weighing range Readability Tare range (by subtraction) Standard deviation Max.
Specifications Model Capacity/weighing range Readability Tare range (by subtraction) Standard deviation Max.
Sartorius AG B P T 37070 Göttingen Weender Landstraße 94–108, 37075 Göttingen (0551) 308-0, F (0551) 308-3289 Internet: http://www.sartorius.com Copyright by Sartorius AG, Göttingen, Deutschland. All rights reserved. No part of this publication may be printed or translated in any form or by any means without the prior written permission of Sartorius AG. Sartorius AG reserves the right to make change to the technology, features, specification and design of the equipment without notice.