Operating instructions

11
Operating the Scale
Weighing
Features
– Zeroing the scale
Depending on the prevailing ambient conditions,
the display may not show a zero readout even
though there is no load on the scale. If the weight
shown is less than 2% of the scale’s maximum
weighing capacity, you can zero the scale.
– Taring the scale (saving a [container] weight in
the memory by subtracting it from the display)
Tare the scale with an empty container on the
weighing pan to obtain a readout of the net weight
after filling the container.
– Printing weights
Preparation
§ Turn on the scale:
Press [ON/OFF]
> A self-test is performed
$ To change settings: please see the chapter
on “Settings”
$ To load the factory settings: please see the
chapter on “Settings,” parameter 9. - 1