Operating instructions

Example

Calibrate/adjust the scale

Settings: factory settings

Step Press key Display/Printout

1. Turn on scale, if power is off [ON/OFF]

0.0 g

2. If necessary, zero the scale [ZERO] 0.0 g

3. Start calibration/adjustment [TARE] (> 2 sec) + 500.0 g

Calibration weight is

displayed without wt. unit

4. Place the indicated calibration

500.0 g

weight on scale (in this case,

500 g)

After calibration/adjustment,

+ 500.0 g

calibration weight is displayed

with wt. unit

5. Remove calibration weight

0.0 g