Operating instructions

18
Example 2:
Counting parts into a full container
Settings: (changes in factory settings required for this example)
Autotare when the [START] is key is pressed: Off (Code 3. 7. 1)
Step Press key Display/Printout
1. Turn on scale, if power is off. [ON/OFF]
2. Place empty container [TARE]
0.0 g
NET
on scale and tare.
3. Place full container on scale [START]
+ 267.3 g NET
and initialize counting.
+ 267.3 SAMPLE
4. Set reference sample quantity; Brief display of:
in this example, turn selector
to “20”.
ref 20
5. Remove selected quantity of
reference parts from
+ 249.1 g NET
container.
+ 249.1 SAMPLE
6. Save reference piece count. [OK]
The scale now calculates
+ 274 pcs
NET
the number of parts and
+ 249.1 + 0.9100
displays the piece count.
7. Print piece count. [PRINT]
nRef + 20
If you have selected wRef + 0.9100 g
“nRef” and “wRef” in the menu, Qnt + 274 pcs
these lines will be printed: N + 249.1 g
T + 50.0 g
G# + 299.1 g
8. Unload scale
0 pcs
NET
9. Repeat counting starting from step 6, if desired.