Operating instructions

Example

Determine the weight of a sample under extremely unstable ambient conditions

by calculating the average of 20 subweighing operations.

Settings (changes in the factory settings required for this example):

Menu: “Weigh averaging” application program, code 2.1.12

Step Press key Display/Printout

1. Turn on scale, if power is off. [ON/OFF]

2. Tare scale [TARE]

0.0 g

3. Select number of subweighing

operations

ref 20 (briefly)

(20 measurements in this example)

4. Place sample on scale

+ 8888

(weight readout fluctuates;

here, for example, by about 275 g)

5. Start measurement [OK]

+ 8888

...

After 20 subweighing operations + 275.5 g G

If the print format is set to include

data ID codes, the following is printed:

RES + 275.5 g

6. Unload scale + 275.5 g G

(stable display)

7. Delete result [DELETE]

8. Repeat procedure starting from step 4, if desired.