Operating instructions

Settings

Setting the Parameters (Menu)

This means you configure, or adapt, the scale to your user requirements by selecting the

parameter settings from a menu.

Example: Adapt scale to place of installation with “Extreme vibration”

Select (Code 1. 1. 4)

Step Press key Display

1. Turn off scale [ON/OFF]

2. Turn scale back on and, [ON/OFF]

while all segments

are displayed, press [TARE] briefly 1.

$ To navigate within a Press [TARE] 2.

menu level; the last menu repeatedly ...

option is followed by the 9.

the first option 1.

3. Select the 2nd menu level [PRINT] 1. 1.

4. Select the 3rd menu level [PRINT] 1. 1. 2 o

5. In menu level 3: Press [TARE]

Select the desired option repeatedly 1. 1. 4

repeatedly

6. Confirm new setting;

”o” indicates the currently Press [PRINT]

set option for 2 sec. 1. 1. 4 o

$ Return to next higher menu

level (from the 3rd menu level) [PRINT] 1.

$ Set other menu codes, if desired [PRINT], [TARE]

7. Save parameter settings Press [TARE]

and exit menu for 2 sec.

$ Exit menu without saving changes [ON/OFF]

> Restart the application 0.0 g