Operating instructions

Factory Settings of the Parameters

Transmission rate: 1,200 baud (5. 1. 4)

Parity: Odd (5. 2. 3)

Stop bits: 1 stop bit (5. 3. 1)

Handshake: Hardware handshake,

2 characters after

CTS (5. 4. 2)

Communications mode: Standard SBI (5. 5. 1)

Manual/automatic

print mode: Manual after stability

(6. 1. 2)

Preparation

§ See sections on “Pin Assignment” and

“Cabling Diagram”

Data Output Format

You can output the values displayed including the

weight unit, either with or without data ID codes.

Example: without data ID code

+ 253 pcs

Example: with data ID code

Qnt + 253 pcs

Select the type of output in the menu

(menu: print formats 7. 1. 1, 7. 1. 2, 7. 1. 3 or 7. 1. 4).

The output without a data ID code has 16 characters;

with the data ID code, 22 characterS.