Operating instructions

Software Handshake

The software handshake is controlled via XON and

XOFF. When a device is switched on, XON must

be transmitted to enable any connected device to

communicate.

Activating Data Output

You can define the data output parameter so that

output is activated either when a print command is

received or automatically and synchronous with the

scale display or at defined intervals (see application

program descriptions [“Counting”] and automatic

print setting).

Data Output by Print Command

The print command can be transmitted by pressing

[PRINT] or by a software command (Esc P).

Automatic Data Output

In the “automatic print” mode, data is output to

the interface port without a print command. You can

choose to have data output automatically at defined

print intervals with or without the stability parameter.

Whichever parameter you select, the data will be output

as the readouts appear on the scale display. The display

update frequency depends on the menu setting for

“Adapt filter” 1.1.x.

If you select the automatic print setting, data will

be transmitted immediately the moment you turn

on the scale.