Operating instructions

6
Item (Spare Part Order No.)
12 [ZERO] key: zeros the display. Sets
the display to zero. Zeroing is only
allowed within the ± 2% range of
the scale’s maximum capacity.
13 [ON/OFF] key: Switches the display
on or off. (The scale remains
energized in the standby mode –
depending on the menu setting.)
14 Display: average piece weight
15 Weight display in the basic unit
selected
16 Shows that a value is in the tare
memory
17 Symbol for standby operation
18 Symbol for zeroing
19 “Busy” symbol
20 Weight unit or piece count (pcs)
21 Manufacturer’s label
22 DC jack
23 Data interface port
24 Main display
Not shown:
Set of small parts (battery cover, selector,
clear plastic overlay) (69C00039)
Item (Spare Part Order No.)
1 Weighing pan (69C00036)
2 Battery compartment
(below the control unit)
3 Control unit
4 Foot (Set: 69C00038 not for
CB…000CA models)
5 [UNIT] key: Toggles between 2
weight units or to counting mode
6 [START] key: starts measurement
of the average piece weight
7 Selector: selects reference sample
quantity
8 [OK] key: saves reference sample
quantity
9 [DELETE] key: cancels operation
This key is generally used for the fol-
lowing:
– End counting
– Cancel a calibration/adjustment
routine in progress
10 [PRINT] key: generates a printout
This key sends displayed values via
the built-in data interface to an
on-line Sartorius Data Printer or
to a computer.
11 [TARE] key: tares (subtracts weight)
The weight of an empty container is
subtracted so that the net weight of
a sample in the container is always
shown afterwards.