Operating instructions

7
Getting Started
Storage and Shipping Conditions
Do not expose the scale to shock, vibra-
tion, moisture or extreme temperature.
Unpacking the Scale
§ After unpacking the scale, check it
immediately for any visible damage
$ If you see any sign of damage, proceed
as directed in the chapter entitled “Care
and Maintenance” under the section on
“Safety Inspection”
Save the box and all parts of the
packaging until you have successfully
installed your scale. Only the original
packaging provides the best protection
for shipment. Before packing your
scale, unplug all connected cables to
prevent damage.
Equipment Supplied
The equipment supplied includes the
components listed below:
– Scale with weighing pan mounted
in place
– Plug-in AC adapter
– Operating instructions
Installation Instructions
CB scales are designed to provide
reliable weighing results under normal
ambient conditions. When choosing a
location to set up your scale, observe
the following so that you will be able to
work with added speed and accuracy:
– Set up the scale on a stable, even
surface
– Avoid placing the scale next to a heater
or exposing the scale to direct sunlight
– Protect the scale from direct drafts that
come from open windows or doors
– Avoid exposing the scale to strong
vibration during weighing
– Protect the scale from aggressive
chemical vapors
– Avoid exposing the scale to extreme
moisture
Conditioning the Scale:
Moisture in the air can condense on
the surfaces of a cold scale whenever it
is brought into a substantially warmer
place. Therefore, condition a cold scale
for approx. 2 hours at room tempera-
ture, leaving it unplugged from AC
power. Afterwards, keep the scale
continuously connected to AC power.