Operating instructions

Internal Calibration (for models with built-in calibration weight only)

The built-in calibration weight is standard equipment on all verified balances/scales and

on the following standard (non-verified) models:

CP2P.., CP225D, CP324S, CP224S, CP64, GC1603P, GC803S, GC803P

Settings:

Calibration/adjustment mode: Internal calibration/adjustment (menu code 1 9 3)

There is a motorized calibration weight within the balance/scale housing which is applied

and removed automatically for internal calibration.

Step Key (or instruction) Display/Printout

1. Turn on balance/scale, e

0.0 g

if necessary.

2. Tare the balance/scale, t

0.0 g

if necessary.

3. Start calibration/adjustment q

Internal weight is applied CAL

automatically.

4. Balance/scale is calibrated

– 0.2 g

(displayed only if menu CAL ± G

code 1 10 2 is set).

5. If the menu code for

Adjust

“calibration and adjustment CAL

in a single step" (1 10 1)

is set, the balance/scale is

adjusted automatically now.

6. At this point, adjustment

is completed. CAL

7. Internal weight is unloaded.

0.0 g

* displayed only if menu item 1 10 2 is selected.