Operating instructions

Counting
39
Menu code: 2 1 4
Display symbol: Z
Purpose
With the Counting program you can
determine the number of parts that each
have approximately equal weight.
Features
– The minimum load is equal to one digit,
defined according to the resolution of the
active weight unit.
– Press and hold the v key (2 seconds)
to set the reference sample quantity.
– Configure the resolution used when
reference sample quantity is stored and
piece counts are calculated.
– Optional automatic output of the piece
count and average piece weight to the
data interface port when the menu
code 7 1 2 (print application parameters)
is set.
– Long-term storage of the last reference
sample quantity “nRef" entered.
– Toggling between piece count and
weight by pressing v.
Function Keys
v:
Begin determination of piece weight
> Application program initialized with
predefined reference sample quantity.
c:
End application program; clear
initialization data
Changing the reference sample quantity:
§ Press and hold v (2 sec.)
> Current reference sample quantity
is displayed.
$ Press v briefly to change the value;
press repeatedly until the desired reference
sample quantity is displayed.
Quantities to choose from: 1, 2, 5, 10, 20,
50, 100.
§ Store setting in long-term memory:
Press and hold v.