Operating instructions

Care and Maintenance
66
Service
Regular servicing by a Sartorius
technician will extend the service life
of your balance/scale and ensure its
continued weighing accuracy. Sartorius
can offer you service contracts, with
your choice of regular maintenance inter-
vals ranging from 1 month to 2 years.
The optimum maintenance interval
depends on the operating conditions
at the place of installation and on
the individual tolerance requirements.
Repairs
Repair work must be performed by
trained service technicians. Any attempt
by untrained persons to perform repairs
may lead to hazards for the user.
Cleaning
!Unplug the AC adapter from the wall outlet
(mains supply). If you have an interface
cable connected to the balance/scale port,
unplug it from the port.
!Make sure that no liquid enters the
balance/scale housing
!Do not use any aggressive cleaning agents
(solvents or similar agents)
§ Clean the balance/scale using a piece
of cloth which has been wet with a mild
detergent (soap)
§ After cleaning, wipe down the balance/scale
with a soft, dry cloth
Cleaning Stainless Steel Surfaces
Clean all stainless steel parts regularly.
Remove the stainless steel weighing
pan and thoroughly clean it separately.
Use a damp cloth or sponge to clean any
stainless steel parts on the scale. You can
use any commercially available household
cleaning agent that is suitable for use on
stainless steel. Clean stainless steel surfaces
by wiping them down. Then clean the
weighing pan thoroughly, making sure to
remove all residues. Use a damp cloth or
sponge to wipe down any stainless steel
parts on the scale again. Afterwards, allow
the scale to dry. If desired, you can apply
oil to the cleaned surfaces as additional
protection.
! Do not use stainless steel cleaning agents
that contain soda lye (caustic), acetic acid,
hydrochloric acid, sulfuric acid or citric acid.
The use of scrubbing sponges made of steel
wool is not permitted.
Solvents are permitted for use only on
stainless steel parts.