Specifications

29
Eliminate Static Electricity Quickly and Reliably
Static electricity can block the entire work-
flow of everyday lab routines. When sam-
ples are weighed, particularly non-conduc-
tive sample materials such as plastic, glass
or porcelain, an electrostatic field may
build up between the sample and the sta-
tionary parts of the balance. As a rule, this
effect is seen when the digits of a weight
readout seem to “race out of control.” This
makes reliable weighing, particularly in the
analytical field, very difficult. By ionization
of samples using the Sartorius StatFan or
StatPen ionizing blower, static electricity
is neutralized within just a few seconds,
making it unnecessary to increase the
humidity of the air. Elimination of static
electricity can be performed instantly
wherever needed, without any time delay.
Sartorius ionizing blowers can be used
anywhere undesirable electrostatic charges
are generated; for example, in production
areas and photographic labs. The flow rate
of the ionizing stream can be continuously
adjusted. For StatPen, the flow rate is
altered by moving it closer or further away
from a sample.
Specifications
Power AC adapter Neutralization Airflow Weight
connection
Ionizing 230 V/50 Hz 18 V/50 Hz Up to ± 20 V Up to approx.
blower 1,000 ccm/min 0.6 kg
StatFan
YIB01-0DR
Ionizing 110 V/50 Hz 18 V/50 Hz Up to ± 20 V Up to approx.
blower 1,000 ccm/min 0.6 kg
StatFan
YIB01-0UR
StatPen 100 V… 230 V Up to ± 30 V approx.
YSTP01 50… 60 Hz 0.8 kg