Specifications

57
Specifications
LMA500PO
Spectrometer system
Spectral range 1,100 to 1,700 nm (effective: 1,100 to 1,680 nm)
A/D converter 16 bits
Spectral resolution [ΔλFWHM] < 16 nm
Wavelength precision < 5 nm
Signal to noise ratio > 3500:1
Photometric linearity Gradient: 1 ± 0.05; Axis intercept: 0 ± 0.05
Functions
Measurement range, typical 0 to 50% moisture (pourable and granulated samples)
Reproducibility, typical (%) 0.2% absolute moisture, dependent on sample and reference method
Precision of comparison, typical (%) 0.5% absolute moisture, dependent on reference method
Measurement time, typical 2 seconds
Memory capacity 1 GB for data and calibration
Sample pan dimensions d 90 mm
Device (Hardware)
Dimensions (W + D + H) 550 + 387 + 180 mm
Net weight, ca. 11.5 kg
Voltage 100 V to 240 V, –15% … +10%
Frequency 48–60 Hz
Fuses 2 (ground/phase), 6.3 AT, 5 x 20 mm
Power consumption 45 VA maximum
Temperature range +10°C … +30°C
IP protection rating IP54 (also during use); Front cover, display: IP65
Built-in interface 2+ RS232C (To connect MA35 and YDP20-OCE)
Format: 7 bit ASCII, 1 start bit, 1 stop bit
Parity: odd
Speed: 1200 baud
Handshake: hardware
Digital interfaces 1 Ethernet (RJ45): 10/100 Base-T, 1 x USB 1.1, PS/2 Keyboard
Display Touchscreen 8.4” TFT (SVGA)