Specifications

78
Conductivity cells and multisensor cell (pH, conductivity, temperature)
The conductivity cells are supplied with a permanently attached cable and an 8-pin DIN
connector.
8 | PY-R01 0.5 μS/cm … 2,000 μS/cm 4-band conductivity cell (platinum) yes
8 | PY-C02 0.01 mS/cm … 5 mS/cm 4-band conductivity cell (platinum) yes
8 | PY-C03 1 mS/cm … 200 mS/cm 4-band conductivity cell (platinum) yes
PY-C12 1 μS/cm … 300,000 μS/cm 4-band conductivity cell (graphite) yes
3 | PY-PC1 0.01 mS/cm … 5 mS/cm Combination electrode, yes
pH value 0 … 14 12 mm diameter;
120 mm length; 2-band cell
(platinum); pH electrode
with gel-filled electrode;
temperature sensor
Ion-selective pH combination electrodes
All ion-selective electrodes are combination electrodes. They are supplied with a permanently
attached cable and a BNC connector.
Ion Measuring range in ppm
9 | PY-I01 Fluoride (F
–
) 0.05 … 500 5 … 5.5
10 | PY-I02 Ammonia (NH
3
) 0.02 … 17,000 > 11
11 | PY-I03 Sodium (Na
+
) 0.02 … to saturated solution 9 … 12
9 | PY-I04 Chloride (Cl
–
) 2 … 35,500 2 … 12
9 | PY-I05 Nitrate (NO
3
–
) 0.4 … 62,000 2.5 … 11
9 | PY-I06 Potassium (K
+
) 0.04 … 39,000 2 … 12
9 | PY-I07 Calcium (Ca
2+
) 0.2 … 40,000 2.5 … 11
9 | PY-I08 Silver/sulfide 0.003 … 12,000 S
2–
| >12 S
2–
|
(Ag
+
/S
2–
) 0.01 … 108,000 Ag
+
2 … 8 Ag
+
Temperature compensating probe
NTC 10 kO Stainless-steel sensor with permanently attached cable and a 2.5 mm male jack.
Figure Order Recommended for... Construction
number
12 | PY-T01 Stainless-steel body,
4.7 mm diameter,
Applica-
tion range
pH value
Order
number
Figure
Recommended
measuring range
Construction
pH applica-
tion range
Order
number
Figure
Temperature measurement and automatic
temperature compensation – 120 mm
length without built-in temperature sensor