Operating instructions

Balances with a Weighing Capacity over 10 kg:

G Insert the right-angle plug into the jack and

tighten the screw.

G Connect the AC adapter to an electrical outlet

(mains supply)

Safety Precautions

Plug-in AC Adapter:

The balance/scale is intended to be supplied by a

listed direct plug-in power unit marked “Class 2."

Universal AC Adapter 6971966:

The AC adapter rated to Class 1 can be plugged

into any wall outlet without additional safety

precautions.

The ground terminal is connected to the balance

housing, which can be additionally grounded

for operation. The data interface is also electrically

connected to the balance housing (ground).

Note:

This equipment has been tested and found to

comply with the limits pursuant to part 15 of FCC

Rules. These limits are designed to provide reason-

able protection against harmful interference. This

equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with these instructions, may cause

harmful interference to radio communications.

For information on the specific limits and class

of this equipment, please refer to the Declaration

of Conformity. Depending on the particular class,

you are either required or requested to correct the

interference.