Operating instructions

41
Reference Sample Updating
Automatic reference sample updating
optimizes the counting accuracy.
You can activate or deactivate this
function in the Setup menu.
When this function is active, automatic
reference sample updating is performed
when the criteria of the factory-set
parameters are met.
> The abbreviation opt, for “optimizing,"
is displayed briefly with the new
reference sample quantity.
Reference Balance/Scale
(Counting with two balances/scales)
Purpose:
Use of a reference balance/scale affords
higher precision in counting large
amounts of parts. The CPA balance is
used to determine the reference weight.
The following weighing instruments or
terminals can be used for sample
weighing in conjunction with a refer-
ence balance/scale:
– For a QC scale: set menu code 8 8 2
– For an FB/FC/LA/LP balance/scale:
set menu code 8 8 3
– For an isi terminal:
set menu code 8 8 4
§ Please order the required connecting
cables directly from Sartorius.
The following settings must have
the same configurations in both bal-
ances/scales:
– Counting program
– Weight units
– Settings in the CPA balance:
Menu codes 7 1 2 and 7 2 2
– All data interface parameters:
– Baud rate
– Parity
– Number of stop bits
– Handshake mode
Transferring the Reference Value from
the CPA Reference Balance:
– Press the (F) key
> The reference value is passed to the
counting balance/scale
Counting Balance/Scale:
$ Refer to the operating manual of
the particular weighing instrument for
further instructions