Operating instructions

113
Extra Functions
Second Tare Memory
(Preset Tare)
Purpose
With this function, you can store the
weight currently on the balance as a
tare weight, or use the numeric keys to
enter a number for a preset tare weight.
You can use this function in combina-
tion with a program from Application 1
(such as counting, weighing in percent),
one from Application 2 (checkweighing,
time-controlled functions) and one
from Application 3 (totalizing, formula-
tion, statistics) as well as with the other
extra functions.
Features
– Store a weight on the balance in the
second tare memory (without numeric
input)
– Store a numeric value in the second tare
memory (input using the numeric keys)
– Identify a net value as
Net1 when
there is a value stored in the second tare
memory
– You can assign this function to the
fourth or fifth soft key (from the right);
i.e., F4 or F5
The soft key designation for this
function is:
PT1/T1
– The container-tare function can be
activated in the Setup menu. Any load
subsequently placed on the scale that
is more than 70% of the tare weight is
automatically recognized as a container
and the scale is tared automatically.
– Automatic printout when a value is
stored or input (see “Configuring the
Balance”)
– Press c to delete the (preset) tare
value
Factory Settings
Container tare weight:
No
Automatic printout: Off
Soft Key Functions
PT1/T1 Store weight as tare value
PT1 Store numeric input as
tare value
Printout of the Data in the
2nd Tare Memory
The printout shows either
– Net value N1,
– Tare weight T1, or
– Manually entered tare value PT1
N1 63.48253 g
T1 138.73234 g
PT1 150.00000 g
N1: Net weight (value) when a weight
is stored in the tare memory
T1: Tare weight
PT1: Preset tare value entered using
the numeric keys
Preparation
G Turn on the balance: press e
> The Sartorius logo is displayed; a self-test is performed
G Select Extra function (F4) or Extra function (F5) in the Setup menu:
press o
G Select
Application parameters: press the q soft key 2 +,
then the
O soft key once
G Select
Extra function (F4) or Extra function (F5): press
the
q soft key 3 x, then press the O soft key once
G Select
2nd tare memory
G Confirm 2nd tare memory
2nd Container tare ο No
tare memory weight Yes
Automatic Net value
printout Tare/preset tare
ο Off
o = factory setting
see also “Application Parameters (Overview)” in the chapter entitled
“Configuring the Balance”
G Save settings and exit the Setup menu: press the
oo soft key
Second Tare Memory in Legal Metrology
– Press the
(i)PT1 soft key to enter information about the tare value using
the number keys.
– The PT1 tare value is printed out with the net value.