Technical data

104
ERWEKA TDR 100
The ERWEKA TDR 100 has been designed to
offer even more comfort as well as documenta-
tion. The TDR 100 is equipped with an interface
to connect either Mettler AB 54 or Sartorius CP
64 balances. The test procedure is completely
menu guided and test run parameters such as
rpm, weight before and after the test as well as
lost in percent is displayed (when a balance is
connected). To print out the documentation and
results a printer can be connected to the printer
interface.
 One friability drum included in the delivery
range
 Easy load and automatic emptying of drum
(friability drum only)
 Compatible for ERWEKA friability- and
abrasion drums
 DC frequency motor with constant actual/
nominal adjustment for adjustable speed
 Adjustable speed from 20 to 100 rpm
 Built in timer
 Numeric touch sensitive keys for pre-
selection of the test run-time in either
number of turns or time
 Illuminated 4-line LC display
 Printer interface for documentation of date,
time, test run parameters and results by a
connected printer
 RS 232 serial interface for external control
and data transfer
 Interface to connect Mettler or Sartorius
balance
 Sample collection container
100–240V/50Hz and 60Hz 11-330-0001
Balances for Connection to TDR
 Sartorius CPA 64
0.1 to 60.0 g, accuracy 0.1 mg. including
wind guard, integrated calibration weight,
RS 232 interface and interface cable to
ERWEKA TDR 70-330-0001
 Sartorius CPA 64 OCE
Same as above, but gaugeable
75-330-0001
 Mettler AB 54
0.1 to 50.0 g, accuracy 0.1 mg. including
wind guard, calibration weight, RS 232 in-
terface and interface cable to ERWEKA
TDR 70-330-0002
Options for TDR
 Friability Drum with certificate
11-330-1xxx
 Printer for docu-
mentation
71-249-0000