Technical data

113
ERWEKA TBH 225
“Industrial Version”
The stainless steel, dust-protected “Industrial
Version” of the TBH 225 series was developed
for those customers who require robust design,
easy handling and fast Qualification without
fulfilling 21 CFR 11 regulations. Since the sam-
ples are inserted into the test station manually
all kind and shapes of samples can be tested.
The unit is handled by a block of numeric mem-
brane keys and the menu displayed at the illu-
minated full graphic LC display (240x64 dots).
Calibration is completely menu guided and may
be performed by either weight stones or the
electronic ERWEKA AutoCal System.
Via a standard USB printer interface a standard
or laser printer (types on request) can be con-
nected to receive hard copy documentation.
The serial LAN/USB interface allows connecting
a computer with the optional MC.net software
for external control. In combination with this the
TBH 225 series is 100% 21 CFR 11 compliant.
 Stainless steel, dust-protected housing
 Up to 99 samples per test
 Electronic load-cell
 Tests samples up to 26/70 mm diameter
 Measuring range 10 – 500 N (optionally:
10 – 1000 N)
 Accuracy 1N
 Adjustable break between the samples
 “Turbo” hardness test jaw, 3 times faster
than previous version
 Two measuring principles available as
standard
 Integrated programme menu for calibration
of the unit with documentation print out
 LAN/USB interface for external control and
storage of results by the optional MC.net
software
 USB interface for USB memory stick stan-
dard
 SD – Card Slot standard
 USB printer interface for documentation of
time, date, results and statistics
100-240V/50 and 60Hz 13-424-0000
Options
 Diameter/length measurement for samples
with a diameter/length of up to 28.00 mm
(accuracy ± 0.03 mm), Version –D/28;
13-424-xx10
 Diameter/Length measurement for samples
with a diameter/length of up to 70.00 mm
(accuracy ± 0.03 mm), Version –D/70;
13-424-1xx0
 Hardness Tester with measuring range
10 – 1000 N 13-424-x1x0
 Set of test jaws for testing of sugar coatings
80-430-0001
 Test Jaws for Ob-
long Shaped Tab-
lets
80-430-0002
 AutoPosition tool not only aligns convex
shaped oblongs, additionally it moves the
tablets against the end point! Therefore the
risk of wrong measurement results by either
inaccurate manual positioning or turning of
the samples is dramatically lowered.
For testing of standard samples a standard
test-station, without rollers, is implemented.
Switching between the 2 different test-
stations is performed within seconds (no
tools required) 12-xxx-xx1x
 WIN.print software (see TBH 225)
50-431-0000
 Spare part kit for ERWEKA TBH 225
92-424-0000
Other options from standard ERWEKA TBH
225 Series (thickness- and weight meas-
urement, test-jaws etc.) are available on
request.
For Qualification (IQ/OQ) documents and
Qualification/Calibration tools please see
“Qualification of tablet hardness testers”