Technical data

124
Important Information
- The area in front of the hardness and under
the width measurement station should be
always dust-free and free of damage. We
recommend scheduled service (approxi-
mately every 300 operating hours) from an
ERWEKA service engineer or qualified per-
sonnel
- We recommend pre-adjustment with PQ
tablets in our service department
- The option width measurement should be
always offered with the option down holder
- Extended measuring range up to 35mm in
combination with width measurement is
available on request
 Singulation of samples via an oscillating
funnel
 Possibility of optical length and width meas-
urement of oblong shaped samples meas-
ured within the hardness test station. Utiliz-
ing a laser the width is automatically an ac-
curacy of +/- 0.1 mm prior to length and
hardness measurement. The results are
then displayed, stored and documented.
 Fully automatic measurement of weight,
hardness, thickness and diameter/length of
round and oddly shaped samples
 Optional batch feeding magazine with 12-
chambers for up to 100 samples/ chamber
 Weight measurement boat to eliminate the
problems caused by dust and debris
 Linear transport of the samples to align ob-
longs
 Automatic cleaning of transport way and test
jaw
 Optional down holder for alignment of prob-
lematic samples
 Test samples up to 26 mm diameter, op-
tional up to 35 mm
 Measuring range 3 – 500 N, optional 3 –
1.000 N, thickness up to 12.0 mm
 Accuracy 1N, 0.03 mm and 0.1 mg
 In combination with the Sartorius weighing
cell the MultiCheck 5.1 offers an accuracy of
+/- 0.1mg, in combination with the CPA 64
OCE (gaugeable) the accuracy is even 10
times higher (+/- 0.01mg)
 Ethernet network connection of the unit
Price includes:
1. MultiCheck 5.1 as described
2. Software package MC.net
!!! Excluding PC !!!
 MultiCheck 5.1 (manual operation of hood) -
Fully automated measurement of weight,
hardness, thickness and diameter / length of
round and oddly shaped samples, including
Sartorius weighing cell and MC.net Soft-
ware.
100V-240V/50Hz and 60Hz 14-455-0000
 MultiCheck 5.1 (manual operation of hood) -
Fully automated measurement of weight,
hardness, thickness and diameter / length of
round and oddly shaped samples. Sartorius
weighing cell. Incl. 12 chamber batch feed-
ing magazine for up to 100 samples per
chamber and MC.net software.
100V-240V/50Hz and 60Hz 14-456-0000