Technical data

125
Options
 Down Holder for alignment of difficult to
position samples including one universal
down holding tool for oblong shaped tablets.
80-455-0000
 Electronically adjustable step before the
thickness measurement station to drop
samples to the right side 2x-45x-xx1x
 Housing made of
stainless steel
82-455-0001
Picture shows MultiCheck V
 Additional price Sartoruis Balance with dis-
play instead Sartorius weighing cell
82-455-9001
 Additional price gaugeable balance, type
Sartorius CPA 64 OCE instead of standard
weighing cell 82-455-9000
 Extended measuring range of up to 35mm
diameter 1x-45x-1xxx
 Width Measurement for oblongs (up to
10mm; accuracy: +/- 0,1mm)
82-455-0002
 Capsule system (weight determination)
1x-45x-xxx1
 Measurement of capsule length (optical)
1x-45x-2xxx
 Extended measuring range (3-1.000 N) with
± 1N accuracy; test-speed up to 2.30
mm/sec. 1x-45x-x1xx
 ERWEKA MC.net Software for the external
control of the MC 5.1 system and the online
storage of user management data, measur-
ing results as well as CFR21/11 compliant
audit trail data 50-420-0000
 PC in ERWEKA standard configuration
(brand name PC in minitower housing, CPU
Intel Pentium Dual Core 2 Duo with mini-
mum 2.6GHz, Hard disk with minimum 250
GB, Main Memory with minimum 2048 MB, 3
serial interfaces, 6 USB 2.0 interfaces, 16x
DVD-ROM device, Windows XP, keyboard,
scroll mouse and 19'' flat screen TFT moni-
tor) 80-430-0009
 Spare Part Kit for MultiCheck 5.1, including
fuses, initiator, toothed belt and reflex button
94-070-0001
AutoCal 2.0 (Dynamic Calibration)
 The new AutoCal 2.0 System is an auto-
mated calibration tool for calibration of the
hardness test station without weights and
without the need of external PC and soft-
ware. With the new AutoCal 2.0 the elec-
tronics-stick is plugged into the USB inter-
face of the TBH x25 (previous series without
USB interface require an adapter), the con-
nected certified load-cell inserted into the
hardness test station. The complete system
(adjustment and calibration) is now per-
formed via the keypad and display of the
hardness tester, a report generated via the
standard printer interface.
The unit will automatically adjust; calibration
can be checked by linearity checking of up
to 50 points within the measuring range and
documented by a connected printer.
85-450-0000
 AutoCal re-calibration with calibration certifi-
cate 36-441-0010