Technical data

131
ERWEKA GTB
The ERWEKA Flow ability Tester, Type GTB is
based on the GT but also measures and docu-
ments the angle of repose optically (by laser).
100-240V/50-60 Hz 10-452-0000
 Spare Part Kit for GTB 92-457-0000
Options
 When testing the characteristics of pow-
ders or granulates with poor flow the
ERWEKA GTB can be equipped with a
stirrer in the hopper 10-452-1xxx
 Set of 3 outlet nozzles with outlet diameter
6.0, 8.0 and 11.3 mm, stainless steel
80-450-0003
 Stainless steel hopper, 100 ml volume
80-450-0100
 Stainless steel hopper, 200 ml volume
80-450-0200
 USB printer interface adapter for standard
parallel printer port (PCL)
80-270-0000
 Standard data export via RS232 interface
for GTB 82-44x-0001
ERWEKA SMG
The manual ERWEKA SMG is the unit for the
reproducible determination of apparent (bulk)
density which can be used with all free flowing
powders or granules. According to DIN ISO 697
and DIN 53 466, the apparent density is deter-
mined by measuring the mass of powder in a
receiver of known dimension after filling from a
funnel of a specified shape under specified
conditions. Within the scope of supply are the
apparatus SMG 697 or SMG 53466, operating
instructions and a calibration certificate.
SMG 53 466 SMG 697
 Height: 205 mm 280 mm
 Width : 156 mm 210 mm
 Depth: 156 mm 147 mm
 Weight: 4.6 kg 7,5 kg
 Material: 1.4305/1.4571 1.4305/1.4571
 Receiver: 100 ml 500 ml
71-455-2001 71-455-1001
IQ/OQ/PQ documents for
Granulate-Flow Testers
66-450-9999 IQ/OQ/PQ documents for
ERWEKA GTL; GT; GTB
Qualification tools for GT/B Series
60-451-9999
Qualification tool kit for GTL (including stop
watch)
66-451-9999
Qualification Tool Kit for GT comprising of stop
watch and weights for balance
66-452-9999
Qualification Tool Kit
for GTB comprising
of 66-451-9999 plus
special cones for
laser Qualification
85-451-0000
Calibration weights (2x 2.0 kg) for readjust-
ment of the integrated balance (GT and GTB
only)