Technical data

139
Laboratory Kneader, LK5
Two st.steel “Z” formed arms are rotating in
different direction in different speed to offer best
mixing results. The container has a capacity of
5.0 litres with a max. capacity of 65%.
Optional the container is available with an elec-
tric heating jacket.
LK 5 10-514-0000
LK 5/DER (heated container) 10-514-5000
Suppository and Lipstick
Moulding Machine, SG 4/W
For the moulding of suppositories, lipsticks and
similar products. The mixing vessel has a ca-
pacity of 5.0 litres with a max. capacity of 65%
and can be electrically heated between 20°C
and 100°C. Stirring, mixing and melting is
achieved in a single operation and are not inter-
rupted during the filling process.
SG 4/W 10-515-0000
Moulds on request
Filling and Dosing Machine for
Liquids, FDF
Two position filling and dosing machine. Pre-
cision dispensing, no-drip filling, easy adjust-
ment of volume, quick removal of the dosing
pumps and valves for cleaning, sterili-sation
and space saving tabletop design.
Max. Output 2.000 fillings/h.
Dosing pumps for 5 - 30 ml (DP 30) and 20 -
150 ml (DP 150) and filling nozzles in different
diameter are available.
The FDF is the basic unit without pumps.
FDF 10-516-0000
DP 30 (5-30 ml) 80-516-0010
DP 150 (20-150 ml) 80-516-0020
Filling Nozzles (2), 6 mm 80-516-0001
Filling Nozzles (2), 8 mm 80-516-0002
Filling and Dosing Machine for
Ointments and Crèmes, FDS
For precision filling and dosing of ointments,
crèmes, emulsions and similar products into
tubes, cans, bottles etc. The st.steel hopper has
a volume of 19.0 litres. Standard dosing ranges
between 10 and 200 ml. Filling nozzles with 2, 4
and 8 mm i.d. are delivered with the unit. Max.
capacity 1.200 fillings/h.
Optional dosing unit for filling and dosing of 0.5
to 25 ml and dispense heads with different ap-
ertures and special heads for filling tubes.
FDS 10-517-0000
Dosing 0.5 to 25 ml 80-517-1000
Dispense heads for tubes 80-517-2000