Technical data

142
Polishing Drum
Designed for polishing of coated tablets. The
interior of the drum is covered with inter-
changeable felt parts. The cover of the drum
has a 120 mm diameter opening for control of
the coating process as well as for adding pol-
ishing agent during the production process. To
connect to an ERWEKA motor drive, a Univer-
sal Gear, Type UG is needed.
PT 10-523-0000
Spare set of felt parts 90-523-0000
Wet Granulator, FGS
The Wet Granulator operates on the oscillating
rotor principle by compressing the granules
through a sieve of a predetermined size. All
parts coming into contact with the product are
made of st.steel. The unit is supplied with
sieves of 1.0 mm and 1.6 mm MW. Other
sieves are available on request.
Max. capacity 30 kg/h.
FGS incl. standard sieves 10-525-0000
Spare sieve 1.0 mm MW 90-525-0010
Spare sieve 1.6 mm MW 90-525-0016
Sieve 300 µm MW 80-525-0315
Sieve 630 µm MW 80-525-0630
Sieve 800 µm MW 80-525-0800
Sieve 1.00 mm MW 80-525-1000
Sieve 1.25 mm MW 80-525-1250
Sieve 1.60 mm MW 80-525-1600
Sieve 2.00 mm MW 80-525-2000
Sieve 2.50 mm MW 80-525-2500
Sieve 3.15 mm MW 80-525-3150
Sieves with different MW can be supplied on
request according to customer specifications.
Dry Granulator, St. Steel,
TG 2000
Two st.steel rollers equipped with teeth produce
a powerful grinding action by forcing the mate-
rial against a series of breaking combs. Very
low proportion of “fines” (max. 25%) which can
even be reduced to about 15% by adjustment of
the “slug” making process. Max. capacity 20
kg/h.
TG 2000 10-524-0000
Pelletiser, GTE
The Pelletiser is attached
to the motor drive via the
Universal Gear to be able
to adjust the angle. The
rotary movement of the
pan carries the product to
the top of the pan where-
upon it then flows down in
an even stream to the base whereupon the
process is repeated. By the addition of the req-
uisite amount of liquid, this process can be con-
verted into the formation of pellets. The pellet
size is chosen by the angle the pan is adjusted,
the amount of liquid added and the type of feed.
When the pan is full, the pellets will be continu-
ously rolled over the edge of the pan into a
container. All parts coming into contact with the
material are made of st.steel.
GTE 10-528-0000