Technical data

143
Cube Mixers, KB
Mixing by tumbling action to produce homoge-
nous blend. Because of the gentle mixing action
the mixer may be used sensitive products. The
mixing action is assisted by three st.steel rods
strategically positioned within the cube. The
Cube Mixer is available in two sizes, made of
acrylic glass or st.steel. Max. capacity is 40% of
the total volume of the cube.
A Universal Gear is needed to attach the Cube
Mixer to the motor drive in order to be able to
change the angle.
KB 15, made of acrylic glass, 3.5 l volume
10-526-0015
KB 15 S, made of st.steel, 3.5 l volume
10-526-1015
KB 20, made of acrylic glass, 8.0 l volume
10-526-0020
KB 20 S, made of st.steel, 8.0 l volume
10-526-1020
KB 30 made of acrylic glass, 11 l volume
10-526-0030
KB 30 S made of st. steel, 11 l volume
10-526-1030
High Speed Mixer, SW 1/S
Drum mixer operating on the plough-share prin-
ciple and designed to mix powders, granules
and other products of a fibrous nature. Quantity
ratios of 1:100.000 can be mixed homoge-
nously in just a few minutes. The mixing drum
has a removable cover and can rotate through
180 degrees for loading and emptying. All parts
coming into contact with the material are made
of st.steel.
The mixing drum has a volume of 5.0 l and a
max. capacity of approx. 70%.
SW 1/S 10-530-0000
Conical Mill, CM 60/UD
Is a product in feed
system for applica-
tion for develop-
ment in pharma-
ceutical and food
industry which
comminute pow-
dery and free-
flowing products by
a sieve (adjustable 0.3 – 3.0 mm; perforated
round holes, grater holes or square holes; see
list) with fixed maximum sizes of impurity-free
granule.
Rotation speed (continuous 60 – 1200
revs/min) and sieve crack (standard 1.5 mm,
adjustable 0.5 – 3.0 mm in 0.25 mm steps) can
be varied for detailed adjustment of process.
10-527-0000
Options
 Material certificate for all product contacting
parts 85-527-9999
 Rotor type I (square shaped impeller bars)
80-527-0100
 Rotor type IV (round shaped impeller bars)
80-527-0200
 Rotor type V (slanted impeller bars)
80-527-0300
 Rotor type VI (small shovel type impeller
bars) 80-527-0400
 Rotor type VII (quarter-circle shaped impel-
ler bars) 80-527-0500
 Rotor type VIII (a large shovel type impeller
bars) 80-527-0600
Sieve/screen inserts
 Round holes RL 0,5 mm
80-527-1000
 Round holes RL – 0,6 – 0,8 mm
80-527-2000
 Round holes RL – 1,0 – 1,4 mm
80-527-3000
 Round holes RL – 1,5 – 2,5 mm
80-527-4000
 Friction holes RR – 1.0 – 1,2 mm
80-527-5000
 Friction holes RL – 1,5 – 2,5 mm
80-527-6000
 Friction holes RR – 3.0 mm
80-527-7000
 Square holes QL– 1,5 – 2,5 mm
80-527-8000