Technical data

15
ERWEKA DT 726
6 test stations, 2 reference positions
For 6 stirring elements
and holding 8x 1000 ml
vessel
230V/50-60Hz 14-070-6001
115V/60Hz 14-070-6003
127V/60Hz 14-070-6004
ERWEKA DT 727
7 test stations, 1 reference position
For 7 stirring elements
and holding 8x 1000 ml
vessel; Additional price
230V/50-60Hz 14-070-7001
115V/60Hz 14-070-7003
127V/60Hz 14-070-7004
ERWEKA DT 728
8 test stations
For 8 stirring elements
and holding 8x 1000 ml
vessel; Additional price
230V/50-60Hz 14-070-8001
115V/60Hz 14-070-8003
127V/60Hz 14-070-8004
2000 ml Version
For holding ERWEKA USP compliant 2000 ml
vessels; water bath made from acrylic glass
instead mould PET water bath. For UniShaft
only (High-Head and/or Low-Head configura-
tion). Additional price 14-1xx-xxxx
Shaft Systems
MagniShaft or UniShaft
DT 720R is available with
two different Shaft sys-
tems:
1.) MagniShaft for mag-
netic connection be-
tween stirring element
and drive or
2.) UniShaft for screw
connection.
Both systems comprise of
an upper Shaft (inside the drive head) and a
lower Shaft to which the Paddle or Basket hold-
er, Transdermal Cylinder (only UniShaft) or
Intrinsic Dissolution Kit (only UniShaft) is con-
nected.
While MagniShaft is only available for Low-
Head use UniShaft system can be ordered for
both, Low-Head- and High-Head use.
MagniShaft is made for simultaneous test start
while at UniShaft system the test start can be
performed simultaneous or staggered.
While the upper Shaft is generally made from
stainless steel the lower parts is mould from
Teflon with an integrated stainless steel core.
On special request stainless steel stirring ele-
ments are available.
All parts are numbered and optionally come
with a certificate of USP/EP compliance.