Technical data

157
Options Inhaler
Leak Test Kit
All impactors should be periodically tested to
check that there is no external leakage. Exces-
sive leakage of air from an impactor can result
in the incorrect flow rate being achieved, poor
aerodynamic performance and possible loss of
drug.
Leak testing is a simple and effective means of
checking that all the impactor components are
assembled correctly and that there is no critical
wear associated with the inter-stage seals.
The Leak Test Kit provides a fast and effective
means of running a health check on the impac-
tor. Simply connect the leak check system be-
tween a suitable vacuum pump and the impac-
tor - the leak test takes approx. 60 seconds.
70-915-0001
 Leak Test Kit with all tools in certified ver-
sion 70-920-0001
Mouth Piece Adaptors
 Standard Mouthpiece Adaptor, Type A
80-910-0001
 Standard Mouthpiece Adaptor, Type B
80-910-0002
Special Mouthpiece Adaptors customised to
particular Inhalers are available on request.
Their purpose is to provide an airtight seal be-
tween the mouth of the test apparatus and the
inhaler being tested.
 Special Mouthpiece Adaptor, Type A
80-916-0001
 Special Mouthpiece Adaptor, Type B
80-916-0002
 Spare canister 80-917-0001
IVIS Stage Mensuration
 Stage Mensuration to check the jets on
Andersen or Andersen Type Cascade Im-
pactor stages from 5.5 down to 0.2 mm in
diameter (Hole Diameter Inspection with
Report)
220-240V/50Hz 70-918-0001
 Stage Mensuration (Hole Diameter Inspec-
tion with Report) including 1 Set of new O-
Rings 70-918-0002
 Manual cleaning and rodding of the Impac-
tor 70-018-0003
 Inhaler Software Programme
50-900-0000
 IQ/OQ/PQ handbook 66-9xx-
9999
Carrying Cases
 Carrying Case for Andersen Type
80-902-0002
 Carrying Case for ASTRA MSLI
80-905-0002