Technical data

61
container by a Peristaltic Pump integrated in the
FRL 820).
In combination with the ERWEKA Windows
based Disso.net software and an UV-VIS Spec-
trophotometer with Cell-Changer, the withdrawn
sample can be either transferred directly from
the Dissolution Tester to the UV-VIS, be stored
in the tubes of the FRL 820 and later analysed
or stored in tubes, automatically diluted and
transferred to the UV-VIS for analyses using
only one pump!
 Precision dosing by the ERWEKA 8-
channel Syringe Pump, SP 825/25
 Stores up to 8 samples for up to 25 sam-
pling cycles
 Samples into tubes (10 or 25 ml)
 Samples into sealed or unsealed HPLC
Vials (1.5 or 4.0 ml max. volume)
 Standard HPLC Vial membrane piercing
 Media replacement to stay within the
USP/EP specified media volume tolerance
 Integrated container for replacement me-
dia, incl. two 1-channel Peristaltic Pumps
to refill the integrated container from an ex-
ternal one after each replacement process
 Automated dilution system (ratio up to
1:10); accuracy to 2 ml
 Integrated container for dilution media, incl.
1-channel Peristaltic Pump to refill the in-
tegrated container from an external one af-
ter each dilution process
 Automated transfer of the diluted/undiluted
sample to an UV-VIS Spectrophotometer
with Cell-Changer, using the ERWEKA
Windows based Disso.net software
3. UV-VIS Spectrophotometers
ERWEKA SPM
double beam in-
cluding position
cell changer.
Ready for Online
Systems includ-
ing tubing and
Microsoft Windows-based software Disso.net
by ERWEKA.
230V/50Hz 71-203-2111
230V/60Hz 71-203-2112
115V/60Hz 71-203-2113
127V/60Hz 71-203-2114
4. System Control
Disso.net
The ERWEKA Disso.net software is able to run
under Windows NT and Windows XP.
For Off-/Online System (Dissolution Tester,
Sample Transfer Pump, Fraction Collector and
UV-VIS Photometer Perkin Elmer and Shima-
dzu, ERWEKA, Analytic Jena and Agilent.
5. System Tubing
System tubing, complete with tubing and con-
nectors, Teflon 3.0 mm o.d.
6. System Pre-Configuration
Control and pre-configuration of the complete
system at the ERWEKA laboratory. Control of
function and numbering of all tubes and inter-
face cables for easy connection at the custom-
ers site.