Technical data

83
Options
Peristaltic Pump for Low-Flow

The standard ERWEKA 8-channel Peristaltic
Pump for transfer of the sample from the
media container through the test-stations of
the Flow-Through-Cell Dissolution Tester.
The media flow rate can be chosen by the
speed of the pump as well as Off-times (foil
keys and LC display).
The pump can either be controlled stand
alone, by the SE or by the ERWEKA
Disso.net software via the RS 232 serial in-
terface.
 8-channel Peristaltic Pump
 Accuracy of volume 15%
 RS 232 serial interface
 Touch sensitive keys and LC display
 Verderprene tubing for elimination of
absorption of active ingredients by PVC
tubing
230V/50Hz 11-202-5001
230V/60Hz 11-202-5002
115V/60Hz 11-202-5003
127V/60Hz 11-202-5004
 Media Transfer Station, Type LMT, to create
a “Close-Loop” system.
Thermostatically heated water bath with 6x
1000 ml beaker glasses, stand with mag-
netic stirrer for each beaker glass, Teflon
tubing 80-012-1000
Filters for Flow-Through-Cell
Filter for USP 4; 0.7 µm; 25 pcs; 15 mm
70-212-1507
Filter for USP 4; 1.4 µm; 25 pcs; 15 mm
70-212-1514
Filter for USP 4; 0.7 µm; 25 pcs; 22 mm
70-212-2207
Filter for USP 4; 1.4 µm; 25 pcs; 25 mm
70-212-2214
Glass beads
Granulate Set with beads 1mm and 6mm,
200mg 80-212-1300
ph change valve
Manual switching valve for pH
media change
80-012-0000
Electronic switching valve for up to 1 media
changes (only in combination with System Con-
trol Unit, type SE) 80-012-0003
Electronic switching valve for up to 3 media
changes (only in combination with System Con-
trol Unit, type SE) 80-012-0003
Online Deaeration Device (only in the pH range
of 4 to 6.5) 80-012-0004
Splitter (from one tube to seven tubes)
80-012-0005