Technical data

91
ERWEKA MediPrep 120
The new bench top degasser from ERWEKA
offers pre-heating, degassing and dosing of
dissolution media. Dispense volumes selected
from 250 ml to 1.000 ml can be chosen in steps
of 10 ml with an accuracy better than ± 1%. The
media is dispensed by weight using the new
load cell. Nominal degassing time of 1m 30 sec.
for 1.000 ml of heated media means a 6 station
test can be prepared in less than 10 min. from
cold media storage.
Degassing is better than 5.5 ppm. A printer is
included for calibration and test print results.
Easy to use menus guide the user through each
operation making media preparation easier and
quicker than ever. No waiting for media tanks to
heat up. Media changes are quick via the flush
routine.
230V/50Hz 70-099-6001
230V/60Hz 70-099-6002
115V/60Hz 70-099-6003
127V/60Hz 70-099-6004
Media Tank
ERWEKA Media Pre-
Heating Tank MT66,
MT120, and MT160 (for
connection to MediPrep
120). For your media
storage ERWEKA of-
fers tanks made of
Polyethilen or st.steel
(66 l, 120 l, or 160 l
volume –
other sizes on request.) The tanks pre-heat the
media and can be moved around the laboratory
on 3” diameter casters. Media is heated by
means of the integrated 1.500 Watts (at 230V)
electronic flow through heater (therefore no
stirring is required). Temperature is adjustable
between 10°C and 50°C, temperature display.
Options
 Dissolved oxygen meter 80-099-6200
 IQ/OQ/PQ document 65-099-9999
 MT 66 Media Tank 80-099-6300
 MT 120 Media Tank 80-099-6400
 MT 160 Media Tank 80-099-6500
 Transformer for MediPrep 120 (from 110V to
230V) 80-099-6600
 Glass rack for up to 3 vessels
80-099-6700
Dissolution Media Preparation and Dosing