Technical data

95
Automatic Blasting Station
Measures: approx
0.6 x 0.8 m, height
0.6 m.
Demands on sup-
ply:
compressed air 6-
8 bar, 100 li-
tres/min at 6 bar,
compressor, res-
ervoir of 50-100 li-
tres.
Power supply 100-240 VAC, 50/60 Hz, less
than 1 A. Blaster sand: Aluminium dioxide 0.2 –
0.4 mm, 1.5 kg per batch of 18 pair of jaws.
The Automatic Blasting Station needs a venti-
lating hood or exhaust for dust that is formed
during the blasting procedure. Small amounts of
blaster sand may fall on the floor during the
filling procedure. The station should not be
placed in the analytical lab.
Instruments for thickness measurements and
surface roughness are needed to control the
jaws and to qualify them before use.
230V/50Hz 72-090-0001
230V/60Hz 72-090-0002
115V/60Hz 72-090-0003
127V/60Hz 72-090-0004
Semi-Automatic Cleaning
Station
Measures:
Cylindric drum with a di-
ameter of approx 0.6 m,
height 0,3 m. A crank
and gearbox is con-
nected to the side of the
drum.
Demands on supply:
The cleaning station is for manual operation in
a ventilated hood or cupboard (basket funnel).
Acetone: 2 litres water free Acetone from a
normal freezer is used at - 20 C for each batch
of 18 pair of jaws. The Acetone may be reused
many times.
An ultrasonic water
bath is needed for final
cleaning with deionised
water and Acetone (Pro
Analysi) after the blast-
ing procedure.
72-091-0001