Technical data

99
ERWEKA ZT 320 Series
The ERWEKA ZT 320 Series offers individual
operation of each test station. Each test-station
comes with its own function keypad and LE
display/s for individual programming of the test-
run time.
In standard configuration each test station of-
fers manual (optional automatic) lift-in and out
of the basket rack assembly on start/ comple-
tion of the pre-set run-time. An alarm can be
selected to be reminded. The actual bath tem-
perature is measured by an external electronic
PT 100 temperature sensor.
ZT 320 series disintegration testers (with op-
tional automatic lift-in/-out) at any time can be
upgraded for one, multiple or all test-stations.
 1 to 4 test racks
 30 1 strokes/min.
 55 2 mm stroke height
 LE display/s to show remaining run-time
and actual bath temperature
 Optional automatic lift-in and -out of the
Basket Racks
 Integrated flow-through heating system
(accuracy 0.2°C)
 RS 232 interface
1 Test Station, Type ZT 321
230V/50Hz 12-231-0001
230V/60Hz 12-231-0002
115V/60Hz 12-231-0003
127V/60Hz 12-231-0004
Automatic Lift-In and Out for ZT 321
12-231-1xxx
2 Test Stations, Type ZT 322
230V/50Hz 12-232-0001
230V/60Hz 12-232-0002
115V/60Hz 12-232-0003
127V/60Hz 12-232-0004
Automatic Lift-In and Out for ZT 322
12-232-1xxx
3 Test Stations, Type ZT 323
230V/50Hz 12-233-0001
230V/60Hz 12-233-0002
115V/60Hz 12-233-0003
127V/60Hz 12-233-0004
Automatic Lift-In and Out for ZT 323
12-233-1xxx
4 Test Stations, Type ZT 324
230V/50Hz 12-234-0001
230V/60Hz 12-234-0002
115V/60Hz 12-234-0003
127V/60Hz 12-234-0004
Automatic Lift-In and Out for ZT 324
12-234-1xxx