Operating instructions

Weighing in Percent

Purpose

This application program allows you to obtain weight readouts in percent which are in

proportion to a reference weight.

Example: Determine an unknown percentage; store the weight on the balance/scale as

the reference percentage (100%)

Step Key (or instruction) Display

1. Select application program w > 2 sec

2. Select Weighing in Percent v repeatedly

3. Confirm setting

Symbol “ ” on the display:

application is active

4. Place empty container on the

balance/scale

5. Zero the balance/scale w

6. Place the reference weight

for 100% on the balance/scale

7. If desired, change the number

of decimal places displayed: 100.0%,

100.00% or 100% (factory setting) v repeatedly

8. Confirm selected no. of decimal places

9. Place unknown weight on the

balance/scale

10. Toggle display between weight

and percentage v repeatedly

11. Unload the balance/scale

12. Weighing in Percent application:

clear the reference percentage > 2 sec

13. Reactivate Weighing in Percent (if no other

application program has been selected) v

14. Repeat procedure starting from Step 5

Enter