Operating instructions

Fastening an Antitheft Locking Device
$ Models FC06BBE-S, FC6CCE-H, FC2CCE-S, FC12CCE-S, and FC6CCE-S only.
To fasten an antitheft locking device, use the lug located on the rear panel of the scale.
§ Secure the scale at the place of installation, e.g., with a chain or a lock.
Leveling the Scale
Purpose:
– To compensate for unevenness at the place of installation
– To achieve perfectly horizontal positioning of the scale for consistent reproducibility
of results
Always level the scale again any time it is moved.
Leveling Scales FC06BBE-S, FC6CCE-H, FC2CCE-S, FC12CCE-S, and FC6CCE-S
Only the 2 front feet are used for leveling.
§ Turn the 2 front feet as shown in the illustration until the air bubble is centered
within the circle of the level indicator
> Several leveling steps are usually required.
§ Extend the two rear feet until they touch the surface on which the scale rests
Leveling Scales FCG34EDE-H, FCG34EDE-P, FCG16EDE-S, FCG12EDE-P,
FCG64EDE-S, FCG64EDE-H
§ Adjust the four leveling feet until the air bubble is centered within the circle of
the level indicator
Setting the Language
> See the “Setting the Language” section in the chapter entitled “Configuration”
Setting the Date and Time
> See the “Entering User Data” section in the chapter entitled “Configuration”
13