Operating instructions

Setting the Device Parameters (DEVICE)
Purpose
This menu item enables you to
configure the scale to meet individual
requirements by selecting predefined
menu parameters in the Setup menu.
You can block access to the menu by
assigning a password.
Features
The device parameters are combined in
the following groups (1st menu level):
– Password
– User ID
– Clock
– Interfaces
– Display
– Keys
– Extra functions
– Factory settings: only device parameters
Factory Settings
Parameters: The factory settings are
identified by the symbol “ο" in the list
starting on the page after next.
Preparation
Display available device parameters
§ Select the Setup menu: press H
> SETUP is displayed:
§ Select “Device parameters”:
use the
q and O soft keys
If no password has been assigned,
anyone can access the Setup menu
device parameters.
If a password has already been
assigned:
> The password prompt is displayed
$ If access is blocked by a password:
enter the password using the numeric
and/or alphabetic keys
$ If the last character of the password
is a letter: conclude input by pressing
the a key
§ Press
l to confirm the password
> Device parameters are now displayed:
$ To select the next group:
press the
q soft key (down arrow)
$ To select the previous menu item of
a group: press
Q soft key (up arrow)
$ To select the next sub-item within
a group: press the
O soft key
(right arrow)
$ To select the previous group:
press the
o soft key (left arrow)
$ Press
l soft key to confirm the
selected menu item
Entering or Changing a Password
– Let’s assume that a password (with
8 characters max.) has already been
assigned to access the Setup device
parameters
§ Select the Setup menu: press H
> SETUP is displayed
§ Select parameters:
Use the
q and O soft keys
> The password prompt is displayed:
$ Enter the password
$ Press the
l soft key to confirm
your password and view the device
parameters
§ Write down your password here for
easy reference:
Password =..............................
If you assign a password and then
forget what the word is:
$ Enter the General Password
(see Appendix)
$ Press the
l soft key to confirm and
display the password
> The parameters are displayed
§ Select the device parameter “Password”:
If necessary, repeatedly press
q or Q ,
until you see
>
Password: and any existing
password
20